72 Demon rust free Pro-Street project

[macs_wedge]

Nice 72 Demon. $8500.00 rolling on 8-3/4 with 3.92 sure grip. Factory bucket seats, console, shifter. Tubbed, Weld Prostars front and rear with new M/T tires. New fuel cell, new gages, new headliner. I have stock to wild big block and small block engine combos for additional $$ if needed. Located 50 miles west of Indy. thanks.

 

[kikgas01]

can I see under the hood? Thanks. Is it set up for big block? Have a tranny,headers?

 

[tensec340]

hard to tell, whats needed to finish besides motor and trans ??
how straight is body and how good is the paint ?
Tim

 

[macs_wedge]

can I see under the hood? Thanks. Is it set up for big block? Have a tranny,headers?

I have a new set of 440 mopar chrome headers, big tubes 2" or 2-1/8" not sure. Cost over $500.00. It is set up for a big block. I did have a 440 in it, but took it out to use the heads on another engine. That short block is fresh with Speedpro pistons, .509 hyd, cam, lightened & balanced rods. The 727 trans is still in the car and I have a 4000-4500 stall converter to go with it. $2000. for the 440 short block, trans and converter. Underhood pic is before it was painted. The paint is 4 coats of acrylic enamel. It needs to be color sanded and a final coat applied.

 

[KP]

Why Would You Not Finish The Car To Sell It?

Just Wondering?

 

[macs_wedge]

Have attached more pictures.

Nice 72 Demon. $8500.00 rolling on 8-3/4 with 3.92 sure grip. Factory bucket seats, console, shifter. Tubbed, Weld Prostars front and rear with new M/T tires. New fuel cell, new gages, new headliner. I have stock to wild big block and small block engine combos for additional $$ if needed. Located 50 miles west of Indy. 812.605.1710 after 4:00pm please. thanks.

 

[rdad60]

hey what type suspension front and rear? disc or drum brakes,what type rear axles? is that a b.b.k-frame? I'm very interested i just sold my 1970 challenger r/t thanks

 

[rscott2560]

Nice 72 Demon. $8500.00 rolling on 8-3/4 with 3.92 sure grip. Factory bucket seats, console, shifter. Tubbed, Weld Prostars front and rear with new M/T tires. New fuel cell, new gages, new headliner. I have stock to wild big block and small block engine combos for additional $$ if needed. Located 50 miles west of Indy. . thanks.

would you be interested in trading car for 72 dodge demon 318 engine its original 4 speed but i put a tremec 5-speed with 8-1/4 rearend. i'am in progress putting in a new dash and wiring harness from front to back.

 

[macs_wedge]

rscott2560..I prefer to sell straight out, have too many projects. thanks for inquiring.

 

[macs_wedge]

After getting under the Demon I discovered that the construction of the back half was not done very well and should be reworked. Due to this; I am reducing the price to $8000.00

 

[macs_wedge]

I have started installing a 440 engine and 727 trans into the demon. My plans have changed due to selling my bracket car. I will be getting the Demon ready to race this spring. As more of the work is completed; the price will be increasing. It is still for sale, but call for current price.

thanks

Mac 812-605-1710

 

[tomsdemon]

Rscot is your Demon with the 5 speed still available?

 

[macs_wedge]

Yes my Demon is still available but it does not have a 5 speed, it has a race prepped 727 torqueflight. You may have my post confused with someone elses.

Rscot is your Demon with the 5 speed still available?