73-76 bucket seat question

[awg329]

Are 73-76 A-body bucket seat bottoms the same left and right ? I know the tracks are different, but what about the seat bottom frame and cushions ? After having my seats re-done they don't seem to sit flat in the car.
Thanks for any help
Alan

 

[Alaskan_TA]

'73 are, not sure about newer.

Did you place your inner seat tracks on the correct sides?

 

[awg329]

'73 are, not sure about newer.

Did you place your inner seat tracks on the correct sides?

Yes I put the tracks on the correct sides. This is a 76 duster with the catalytic converter hump and I am using 75 valiant buckets, so it has the flat track for the drivers inboard. I did swap seat bottoms and the drivers seat inboard bolster is still about 3/4" lower than the rest. Same result, so I think these seat bottoms are the same left/right. I think I will have to try shims between the tracks and reinforcement plates.
Thanks for the reply.

Alan