I've decided to post my project here. I (finally) need help and I'm not too proud to admit it. I'm doing a heavily modded ground up G3 swap and I am at the point of electronics :-( I've got the body straight but had to replace the top (old vinyl top killed the original top). Of course, the bottom of the rear (beyond COOL looking) glass was rotted out and I replace that too. Moved the gas filler cap to the top, like a Charger. 8.8 Ford rear end. 2007 5.7 HEMI (Chrysler Aspen) that is mostly a stocker (slightly ported and polished heads). 2007 545RFE (Ram 1500). 2007 Ram 1500 wiring harness and ECM. I made my own stainless steel headers and motor mounts to fit around the stock power steering (I'm old and feel like driving in comfort). I modded the V8 K-frame to hold the HEMI and made my own UCA's and LCA's and used the QA1 coil-overs.
So, there it is. I dropped the harness in last night. I still need some sensors and I need to fish in the harness back to the 545 and plug that in but at that, my skills ended!I can't power up this computer. I can't tune it. I don't even know how to bring power to it. Really, about all I know about this is that I'm gonna have to install a fuel pump relay circuit for the in-tank (yes, I'm going to make my own tank too) fuel pump.
What do I do to light up this computer?
So, there it is. I dropped the harness in last night. I still need some sensors and I need to fish in the harness back to the 545 and plug that in but at that, my skills ended!I can't power up this computer. I can't tune it. I don't even know how to bring power to it. Really, about all I know about this is that I'm gonna have to install a fuel pump relay circuit for the in-tank (yes, I'm going to make my own tank too) fuel pump.
What do I do to light up this computer?
