74 Dart w/ 340 6 pack

-
Thanks, 67DartGT340. I am just getting back and it will take another month or so to get all the trim and all the little stuff put back together. I'll get some pictues up soon.
 
I got back from my work trip and was told that I will be going right back out for a month.....So the trim work will have to wait for a little while longer. I did get the seats and carpet back in and still need to put the door panels back on. I did do a test drive to get gas and the brakes are still real spongy SCARY!!! I think I need to get a master cylinder with a bigger bore because I went to calipers in the rear instead of the drums. If anyone out there has done this before please PM me as I have a few questions. Alright here is some pictures and a couple of videos.....Enjoy
IMG_0587.JPG


IMG_0588.JPG


IMG_0589.JPG


IMG_0590.JPG


IMG_0591.JPG


IMG_0592.JPG


IMG_0593.JPG


IMG_0594.JPG


IMG_0597.JPG


IMG_0598.JPG





 
Last edited:
'64 Cuda said:
Gotta' love a six pack!
Click to expand...

I DO!!! I DO!!! :cheers:

74DartSwinger360 said:
Man I am jealous. What cam did you use? And Fan Shroud?
Click to expand...
Fan Shroud is the old one just cleaned up and painted. The cam is a Comp cam 268/280 with a valve lift of .477 intake and .480 exhaust.
Still have lots to do and I have to hit the road for work.:wack:
Crossing fingers......Have it done by mid of August.......
 
I'm on the road for work right now and I won't be back home till mid July. I still have about a month or so of trim work to do and I still have to do something about the brakes. I also have been thinking that I need to do a firewall forward wiring harness. I've had some problems with getting it started and I have found some bad wiring under the wrap. That's where it stands right now, still hoping for mid August to have a real ride to cruise around in.
 
Picked up the car after getting some work done on the cowl and then took it down to another shop to have the whole car rewired. I was thinking I would only do the front end but after really looking at all the wiring I will get it done all at once instead of doing it again when I have more problems . I should have it back in a week and then it's on to the brakes.

Getting her on the trailer
imagejpeg_1.JPG


Me getting her buttoned up for her trip.
imagejpeg_0.JPG
 
Last edited:
Nice car.Couple questions,was there any clearance with the breather on on a stock hood?And which breather did you get?Cold air or non cold air?I've been doing a similair build.I sent a PM but I dont think it went thru.
 
mopar410 said:
Nice car.Couple questions,was there any clearance with the breather on on a stock hood?And which breather did you get?Cold air or non cold air?I've been doing a similair build.I sent a PM but I dont think it went thru.
Click to expand...

Thanks I've been work on it almost two years now and hope to have it done soon.
I never had the motor in when the stock hood was on. I think the front is a little higher than the hood line but I'll check on it when I get the car back from rewiring.The air cleaner is from Mancini Racing(MOP-P4529057AB)
and is non cold air.
 
Picked the car up today and now she's back home. The wiring looks great and everything works great. Thanks to Kenny and Raul over at Auto Sound Specialist in Union City. I'll get some more pics tomorrow these are from today on my phone.
imagejpeg_2.JPG


imagejpeg_3.JPG


imagejpeg_4.JPG


Now I need to start on the trim work and fix the brakes and get the alignment done.
Almost ready to roll.
 
Last edited:
I got a lot done today, got the grill and headlights back in along with hood latch and release and the front support for the hood latch and cable. Put in the 6x9 speakers in the rear deck. Still got lots to do before we ride Rob but it will be soon.
 
Since I didn't get a chance to take any pics yesterday I got some today. Almost ready.
P8279566.JPG


P8279568.JPG


P8279571 (1).JPG


P8279572.JPG


P8279573.JPG


P8279576.JPG


P8279590.JPG


P8279591.JPG


P8279596-1.JPG


P8279602-1.JPG


P8279613.JPG


P8279616.JPG



Next weekend I hope to have all the interior done and ready to go get the brakes done.
 
Last edited:
Got the interior done and fixed the brakes. I went to get the alignment done last week but the machine they had won't work so I'm going to get it done tomorrow.
P1019627.JPG


P1019742.JPG


P1019632.JPG


P1019633.JPG


P1019630.JPG


P1019629.JPG


P1019645.JPG


P1019716.JPG


P1019740.JPG


P1019717.JPG


P1019641.JPG


P1019644.JPG


P1019689.JPG


P1019714.JPG


P1019659.JPG


I think a cruise is right around the corner..........
 
Last edited:
Just got back from a work trip in Santa Cruz. I drove the car down for a three day conference and had a blast. I've got a couple of little bugs to work out but I think this is one sweet ride finally!!
 
Good to hear makes my want to get mine done. Nice car
 
You must log in or register to reply here.
-

Back
Top