74 V8 stock power steering pump bracket help please

[DusterDaddy]

My project was a basket case when I bought it. It was over two years ago when the blown motor was taken out. I have been staring at the motor and then then this pump and bracket for a week now and it confounds me how it could possibly work...Any help would be appreciated.....:sign3:

 

[replicaracer43]

dont think i have ever seen that bracket on a A body before

 

[AJ/FormS]

I've seen that bracket before, but can't recall where.
I think on a 69 down sbm. Maybe. IDK

Check out Bouchilon Performance for a pic of what you need

 

[Howard1784]

My 73 Duster has that bracket. There should be 2 studs threaded into the PS pump that this bracket mounts to. Also, there is another bracket involved. Note: the threaded female portion goes to the top. As stated above, Bouchilon Performance has the diagram and all the brackets/studs if have the coin.

I bought an aftermarket reservoir and left the studs in on the core. Went to the above to get new ones which are only in a kit. Could make your own I guess.

 

[Howard1784]

See pics

 

[AJ/FormS]

Howard
Does you bracket have the two spacer tubes welded on like the OP's does? I cant seem to see that