8 3/4 housing perch set up

-
T

terry

Well-Known Member
Joined
Jul 7, 2005
Messages
459
Reaction score
7
Location
moorpark,california
Hi folks
I'm looking for someone in southern ca. that can cut off my old perches and weld on the new ones with the correct pinion angle.(blank magic all on its own) . i have the mopar off set shackle kit and mopar s/s springs.The car seems to have had a vibration ever since i welded on the perches after installing the off set shackles years ago. I would like to deliver the housing. I just can't bring myself to pay 45 dollars each way to get them up to dr, differential. (cass)
PM me with any input
Thanks
Terry
 
Why don't you just buy some angled shim plates and try to adjust it yourself?
 
Cost me 115 at my local driveline shop. They will either need to know your wanted pinion angle, or a rear that is known to have the correct angle. (Shop hrly rate).
 
I did use the angle shims and the vibration was a lot less noticeable. i think i used 4 degree so instead of using more shims etc. i would like to do it right.
 
You must log in or register to reply here.
-

Back
Top