8 3/4 rearend

[terzmo]

8 3/4 rearend minus drums and brakes...has 741 case with 323 suregrip. Small bolt pattern...Off an A body...72 demon...700

also 8 3/4 center section 489 case...430 suregrip....500.00

will mix and match..outside of Buffalo NY

 

[sireland67]

PM sent on the 4.30

 

[41husk]

wish I was closer.

 

[eDart]

wish I was closer.

Do you know if my stock 4.5 bolt axles from my 7.25 rear (74 swinger) could be swapped in the 323?

 

[41husk]

Not completly sure but I believe the sure grip axles differ from the open, I would also think but don't know, that the axles will be thicker on the 8 3/4. I am sure many people on here know for sure.

 

[terzmo]

There are some 8 3/4 axels that will fit in but need to be cut down a bit. I'm not possitive about your swap but I would lean towards yes unless the gear spacing is different from a 7 1/4 to an 8 3/4 centerchunk

 

[oldkimmer]

Do you know if my stock 4.5 bolt axles from my 7.25 rear (74 swinger) could be swapped in the 323?

.........not a chance..............kim........8.75 axle splines are all the same...

 

[old school]

Hello
Will you ship to Memphis Tenn? I'll pay the shipping. Is the spacing between the backing plates around 51.400"? What is the spacing on the spring hangers?
Old School

 

[terzmo]

it's only the center chunk

 

[terzmo]

rearend is sold except for the center chunk 489 case...430 gears...suregrip

 

[D-mailman]

PM sent.