833 driveshaft

[tet68]

willa a 904 69 dart driveshaft work with a 833 a body transmission both 8 3/4 rear ends

 

[goldduster318]

Yes, but you'll need to swap the yoke to the larger spline one for an A-833

 

[tet68]

Yes, but you'll need to swap the yoke to the larger spline one for an A-833

will the 727 yoke work got one of them

 

[goldduster318]

Yes, as long as its the same size u-joint

 

[tet68]

Yes, as long as its the same size u-joint

thanks hopefully this is the last detail in my 4 speed swap

 

[AJ/FormS]

Try not use the 7260 joints with a stout 360.......unless you are a streeter, and running skinny tires.

 

[dano]

My stock drive shaft is 51.6" long and FYI has 7290 u-joints.

 

[tet68]

thanks hopefully this is the last detail in my 4 speed swap

My stock drive shaft is 51.6" long and FYI has 7290 u-joints.

thanks

 

[dano]

thanks

I should clarify, that was from the center of the u-joints.

 

[CurtDawg510]

Just make sure that 727 slip yoke has a tight fit!!!
Ive bought 3 new yokes and they all fit loose and vibrate 2500rpm and up
I got a spicer yoke getting put on and balanced now at shop.... but just make sure that slip yoke fits tight...
PTI makes loose yokes

 

[70aarcuda]

Been drag racing with 7260 yokes for years with nothing ever breaking...