900 hp big block with EFI

[AndyF]

I cleaned out my in box so try again. I tried to send you a PM but the system keeps timing out. Must be something wrong with the board today.

 

[sixtycycle]

I cleaned out my in box so try again. I tried to send you a PM but the system keeps timing out. Must be something wrong with the board today.

I know this is old but is there a system like this out there or do you have a part list to get me on my way? 69 Roadrunner 796HP 540 Mega block MSD grid with MSD crank trigger, locked out Mopar dist gary wiliams carb runs 9:03 @ 148 but want to do more street and show driving and reliability and not choking and burning eyes at show lol thanks for any help Rusty

 

[PRH]

If Andy sees your post I’m sure he’ll respond, but until then……
Imo, as far as EFI systems go, 2017 was a lifetime ago.
I’d be shocked if there aren’t fairly simple options available today to satisfy your needs.
You might try contacting Rich Nedbal at Fastman EFI in California and see what he suggests.

FAST Man EFI, Fuel Injection, California


Or

https://www.holley.com/products/fue..._efi/sniper_4-barrel_systems/sniper_efi_4500/

 

[Mean416]

I have a Holley dual sync distributor but decided not to use it. If you want to buy an unused dual sync shoot me a note since I don't have any plans for it. I ended up making my own cam sensor. I'll attach a couple of pictures of the cam sensor that I made.

View attachment 1715048995

View attachment 1715048996

Can you do a little write up on the details of the can sensor please?

Ohh yeah I just noticed this is ancient. He does list the sensor so I'm sure I could figure it out if need be.

 

[AndyF]

I know this is old but is there a system like this out there or do you have a part list to get me on my way? 69 Roadrunner 796HP 540 Mega block MSD grid with MSD crank trigger, locked out Mopar dist gary wiliams carb runs 9:03 @ 148 but want to do more street and show driving and reliability and not choking and burning eyes at show lol thanks for any help Rusty

There are lots of EFI systems available these days. The cheapest would be a Holley Sniper setup.

 

[AndyF]

Can you do a little write up on the details of the can sensor please?

Ohh yeah I just noticed this is ancient. He does list the sensor so I'm sure I could figure it out if need be.

I made those cam syncs for a few years. I think that Rich at FAST Man EFI still has some low deck versions on the shelf. I stopped making them recently because they just got to be too much work.