904 dipstick

[dukes69]

Anybody know where I can get a dipstick for my MOPAR performance deep pan? I got the pan and filter spacer and all the gaskets and stuff from Mancini but now I need a new dipstick????

 

[fishy68]

Is your old one broken? If not use it. That's the purpose of the deep pan. To hold more fluid. Fill it right up to where you always filled it up.

 

[jet-taz]

you can buy a new one from chrylser p/n 04202951

 

[barracudadave67]

Why do you need a new dip stick,???. The dip stick will read in the same area as it did before you put on a new deep pan. You could pull it out and put a new "o"-ring on it so it won't leak.
Just for your info,When you install the new Mopar deep pan, I would put on the new style pan gasket from a Mopar Dealer.This new gasket does not come with the deep pan kit. They cost about $12.00 from a dealer.Just ask for one for a 904.They will not leak. Torque the pan bolts to 13Ft lbs. Also when you are filling your new "mopar" deep pan, it will take 7 1/2 qts. of fluid. I use Mopar ATF+3 in all my older cars. Hope this helps.

Dave C.

 

[dukes69]

Thanks for th info, I didn't go with the kit gasket, I got a reusable rubber one that my trans guy guarantees. Once again thanks for the help