[Found!] A833OD setup for Slant 6

[Iron Oxide]

I'm looking for a Slant 6 A833OD swap out of an A/F body preferably in the Alabama/Tennesee/Georgia area.

I'm hoping to find a completish swap, bellhousing, trans, rods, z bar/fork, etc if at all possible.

Thanks!

 

[YY1]

I have a bell housing if you find the other stuff piecemeal.

 

[65 Dartman]

@FWDLK Frank

 

[66fs]

I'm looking for a Slant 6 A833OD swap out of an A/F body preferably in the Alabama/Tennesee/Georgia area.

I'm hoping to find a completish swap, bellhousing, trans, rods, z bar/fork, etc if at all possible.

Thanks!

I have a trans, what car is this going into?

 

[FWDLK Frank]

I'm looking for a Slant 6 A833OD swap out of an A/F body preferably in the Alabama/Tennesee/Georgia area.

I'm hoping to find a completish swap, bellhousing, trans, rods, z bar/fork, etc if at all possible.

Thanks!

I definitely have a trans, bell and a I think a flywheel. I'm in MD. I have one trans that has been professionally rebuilt by brewer's another that I consider a good core for rebuilding. The core I have is an early 76 cast iron 833OD (as opposed to aluminum). PM me if you're interested. Thanks for the plug Dartman!

 

[Iron Oxide]

I appreciate the responses guys, this is a 64 Valiant.

 

[Charrlie_S]

If the engine is a 67 or earlier, you will need to get a flywheel adapter to use the later flywheel. They are available on this site from @slant six

 

[barracudakid]

i have a 4 speed od
With linkage and shifter

 

[Iron Oxide]

?

I have a bell housing if you find the other stuff piecemeal.

Hey YY1, your inbox is full.