Abody rotors

[dartfreak75]

I'm getting ready to start putting my suspension back together so I'm gonna go ahead and order new rotors. This may be a dumb question but I dont know the answer so...
Do the rotors come with new bearings or do you have to buy them separately? It says in the description rotor and hub assembly. I would think hub assembly would mean in does but Idk. Iv never bought rotors for a abody before lol thanks guys

 

[Kendog 170]

I'm assuming 1975? I think you will have to order bearings. Earlier SBP rotor are bare and No Hub included . Held on with pressed wheel studs.

 

[dartfreak75]

I'm assuming 1975? I think you will have to order bearings. Earlier SBP rotor are bare and No Hub included . Held on with pressed wheel studs.

Yea 75 is correct large bolt pattern

 

[Daves69]

I don't ever remember bearings coming with a wheel/hub assy.
However, both races are in a pair I bought a while back, no bearings..........

 

[abodyjoe]

Have to buy bearings and seals separate. Never seen them come with the rotors.

 

[dartfreak75]

Thanks guys that clears it up I will order bearings too. I appreciate it!

 

[abodyjoe]

Don't forget seals too.

 

[TrailBeast]

Thanks guys that clears it up I will order bearings too. I appreciate it!

I recently got new rotors and they had races installed but no bearings or seals.

 

[RAT ROD AL]

I have a used set , I linked you to the tread. Might save you some money.

 

[Kendog 170]

There not much. Timken or National are my favorite.
1975 DODGE DART 5.2L 318cid V8 Wheel Bearing | RockAuto

 

[dartfreak75]

There not much. Timken or National are my favorite.
1975 DODGE DART 5.2L 318cid V8 Wheel Bearing | RockAuto

Yea there not expensive I just didnt want to buy them if I didnt have to lol

 

[dartfreak75]

I have a used set , I linked you to the tread. Might save you some money.

Thanks bud I'm gonna go with new ones tho.

 

[K.S.]

Thanks bud I'm gonna go with new ones tho.

If they're not bad, you can just clean and repack them.