Bigboy 68
it is what it is
I’m not sure but I think I read in another thread that mods need to be done to a small block K frame with using Schumacher big block conversion mounts any help on this would be appreciated
Biscuit MountAre you starting with a spool or biscuit mount k frame?
'67-72 A-Body B/RB InstallationI’m not sure but I think I read in another thread that mods need to be done to a small block K frame with using Schumacher big block conversion mounts any help on this would be appreciated
Is this normal?
I am having a similar problem. The motor is not centered and sits way to the passenger side of the car.
I have the same setup in my 68 with Schumacher setup.
Is this normal?
I am having a similar problem. The motor is not centered and sits way to the passenger side of the car.
I have the same setup in my 68 with Schumacher setup.
Is this normal?
pics are great. I will be swing a 440 into my 69 Dart. Did you pick up the engine and trans on the carb plate ? My 440 has alum heads , alum intake ... I am wondering if the engine / trans package is too heavy to pic up with 4 3/8 bolts into alum ? any input ? thanks,
I originally wanted to drop mine in from the top as well, but followed advice on this forum and dropped the k-frame instead. On the plus side, you don't need to take the hood off!I was going to drop the engine / trans in from the top. Is this a major prob going in from the top ?