Anyone Ever Check The Pan for Volume?? pics included

[66aCUDA]

Several folks on Slantsix.org have built custom pans. Remember Charrlie is using an Early A pan as his base You will need a Late A pan. The problem that arises is that the different years have different clearances in different places. Look at the Build thread on Ruster that Greg Ondayko made. He did a great job on his pan and it is a late model A.
Frank

 

[turbo66valiant]

Am I the only one without any oil mods? No baffles, no scapers, no windage tray, no deep sump, no oil pump mods, no internal block massaging. Just bone stock factory. Later

 

[805moparkid]

This might give you some insight.

http://u225.torque.net/cars/SL6/tech/oilpans.html

Several folks on Slantsix.org have built custom pans. Remember Charrlie is using an Early A pan as his base You will need a Late A pan. The problem that arises is that the different years have different clearances in different places. Look at the Build thread on Ruster that Greg Ondayko made. He did a great job on his pan and it is a late model A.
Frank

well i havethe right pan!! so i'll just add 2" making to 4qts in the sump/ baffle the front and rear of the sump and call it good!!