Anyone have torsion bars?

[bjkadron]

Hey all,

I am looking for a set of higher rate torsion bars but on my budget I can't swing a new set. Anyone have some they might want to get rid of?

Thanks,

 

[physixx]

I have a set of early V8 bars that were used in the 318/340 cars. I have them on ebay right now if you wanted to check them out. They are #2071622/623. According to the Mopar Performance book, they were put in th 1960-1965 A-body cars and are the same as the later 2535892/893 bars. They measure .870” in diameter and according to the interchange book, they fit the 1960-1974 A-body cars with a 340 or 360, or 273 cars with HD suspension or A/C. The ebay listing # is 330461402993 if that helps.

Ken

 

[Baxter61]

I have some 340 bars out of a 69 dart (i believe, not 100%) $75 plus 1/2 shipping.

 

[72ScampTramp]

Ok what are yours now?

 

[bjkadron]

Sorry about that.. I have the hd Small block bars(318 w/ AC+ .89 if I remember correctly). So I would need either Big block or aftermarket. Sorry I neglected to mention that.

 

[bjkadron]

My Pass side is stamped 892 over 192 I am not sure which those are... And I don't know where to look that up.So anything bigger than that would be an upgrade.