auto to man

[tooslow]

I want to convert my 68 440 dart road racer with an auto trans to Manual.
I will use a Tremac 5 speed.

Where can I buy the pedals, bellhousing, clutch, ect.....?
Will I have any problem with the pilot hole on the end of the crank when converting from Auto to Manual?

I can buy the bellhousing and clutch kit on Ebay but what about all the shafts and misc?
Has anybody done this?

 

[1968FormulaS340]

This may get you started.

http://www.brewersperformance.com/

 

[68barracuda]

I have a shifter and rods and a Bellhousing along with a shift fork and mabe a trans cross member.
I also have an b/e 4 Speed along with a A Body tail housing and gears that needs a rebuild but is a good core.
Let me know if you are interested I'll let the stuff go cheap!
Located in Detroit suburbs.