[SOLD] B-body? 8.75

[Projectile Dart]

I will post on FBBO if there seems to be no interest here but I love this site so I figured I would offer it here first. I was told that it came from a 440 Roadrunner but I didn't pull it so I am not sure. A local deal popped up for a stock A-body size 8.75 and I would rather go for that then try to narrow/modify this one. I paid $650, looking to break even on it.
3.23 gears, open diff, 489 case. No brake lines but otherwise complete
Located in Long Beach, CA 90813, I would prefer not to ship
I want to be as honest as I can be with this so feel free to ask any questions and I will answer to the best of my ability.
I cant find my card with measurements but I will post those later today

 

[Projectile Dart]

These are not going to be perfect but a few measurements I got were from spring perch center to center: 47"
Widest point I could pick up on the outside of the drums about 63"
From the inside of the drums, brake cylinder to brake cylinder, about 55"

 

[Projectile Dart]

Price lowered to $600

 

[318willrun]

These are not going to be perfect but a few measurements I got were from spring perch center to center: 47"
Widest point I could pick up on the outside of the drums about 63"
From the inside of the drums, brake cylinder to brake cylinder, about 55"

I believe B-body rear ends are 44" perch center to center

 

[SGBARRACUDA]

Could be a late B or C or E.

 

[72bluNblu]

‘71-74 B-body 8 3/4’s are 47.3” center to center on the perches and 63” drum-drum. This seems to match your measurements and it could still be from a roadrunner.

C/E bodies were 46” c-c at the perches.

An accurate 8 3/4" rear axle width list

 

[Justinhb]

Dang, if this was for an A-body I would be on this - and not that far away!