B&M flexplate for magnum 360

[billytuffnuts]

Have a couple questions about the b&m flexplate for a 360 magnum to 727 trans... I believe the part # is 10242

I know to use as stock magnum flexplate and a 727 converter, one of the bolt holes on the flexplate needs to be elongated to fit, does that need to be done with the b&m version too?

Also, the converter I have uses the larger 7/16 bolts, will I have to enlargen the b&m's holes to fit?

 

[70aarcuda]

the b&m flexplate actually come with 3 set of holes drilled...both 7/16 and 5/16 and one with a smaller bolt pattern...

since you are going to a 727...and 727 have an offsetted lug...i bet the flexplate has an offset lug..

you can always call b&m......