[SOLD] BB PC heads

[oldkimmer]

Brand new Procomp CNCed bare heads. The chambers are even CNCed. $1300.00 usd shipped in Canada or the lower 48. These take the .630 offset intake rockers. I have some of them also. Thanks. Kim

 

[oldkimmer]

Now $1209.00 usd. Kim

 

[ValiantKindOfGuy]

Port volume and flow?

 

[oldkimmer]

Sorry I don’t have that info. They are 265 cc but not sure if that’s b 4 or after the CNC porting. I think b 4. Kim

 

[RustyRatRod]

@halfafish

 

[oldkimmer]

These are a copy of the Edelbrock Victor heads. Kim

 

[famous bob]

These are a copy of the Edelbrock Victor heads. Kim

I have those on my 440/505 , we flowed them after changing the retainers and keepers. I don't know which machine shop cnc`d them , but they flowed 354 @ .600 lift , and didn't go up much from there , and are very good quality --------

 

[oldkimmer]

I’m gonna try get valves for these. Kim

 

[oldkimmer]

$1100.00 usd plus shipping. Thanks. Kim

 

[oldkimmer]

Bump

 

[gpc213]

Bump

have these been clearanced for pushrods

 

[oldkimmer]

No they are factory, nothing done to them other than the CNC porting. I do have another set in the for sale ads that have been clearanced. Kim

 

[oldkimmer]

Bumperoo

 

[oldkimmer]

Bump

 

[HOTMOPR]

Bump

What is the combustion chamber CC? 2.14/1.81 valves?

 

[famous bob]

Port volume and flow?

Don't know if the same cnc program was used as mine , but mine flow 354 @ .600 lift -------
2.19 INTAKE------- jfyi

 

[oldkimmer]

68 cc. 2.20 and 1.81 valve sizes. Kim

 

[HOTMOPR]

68 cc. 2.20 and 1.81 valve sizes. Kim

Thanks for the info.. Too small for my combo

 

[oldkimmer]

Thanks for the info.. Too small for my combo

Ur inbox is full. Send me a message on what ur looking for. Thanks. Kim

 

[HOTMOPR]

Ur inbox is full. Send me a message on what ur looking for. Thanks. Kim

You can thank all the joey messages for that.. :/ I need something in the 84cc range. Looking more like Ill be redoing my stage VI heads

 

[oldkimmer]

I have Indy SRs, but they are 75 cc stock, but are polished so maybe 77 cc. Are stage 6s 80 plus cc? I do have a set of stage 6s with about 200 runs on them. They are on my 470 stroker. A guy wants to buy the short block. Kim

 

[HOTMOPR]

I have Indy SRs, but they are 75 cc stock, but are polished so maybe 77 cc. Are stage 6s 80 plus cc? I do have a set of stage 6s with about 200 runs on them. They are on my 470 stroker. A guy wants to buy the short block. Kim

The stage vi are 88cc. I don’t want to go below 80cc to keep my ratio around 11-1. I don't really need another set unless they are cnc ported.