grampscamp
Well-Known Member
No part # on box. 12 balls. Thanks in advance.
Bearing. For what?
- Thread starter grampscamp
- Start date
-
Should be a number on the bearing
MOPAROFFICIAL
Oogliboogli
Column?
67Dart273
Well-Known Member
"Mike" it. Most bearings are metric. There are rather special ones that are inch measurements, but these are usually for things like table saws where you have inch measurement blade arbor mounts, etc.
Usually, if you get one measurement accurate, you can find the other without such accuracy. Find a local bearing outfit that has an IBI "International Bearing Interchange." You might even find that online.
such as........
www.hchbearingamericas.com
www.mrosupply.com
And a 6203 size wise is same as a 203
Usually, if you get one measurement accurate, you can find the other without such accuracy. Find a local bearing outfit that has an IBI "International Bearing Interchange." You might even find that online.
such as........
62 Series Deep Groove Ball Bearings - Your Source for Affordable, High - HCH Bearings
When it comes to ball bearing manufacturers, no company beats HCH Bearing Americas. Shop our affordable, high-quality ball bearings online now.
www.hchbearingamericas.com
BALL BEARINGS SIZE CHART - MROSupply.com
And a 6203 size wise is same as a 203
Last edited:
Wow. Must be an auto guy?
That’s not even vaguely in the ballpark for the proper dimensions for anything small block, big block, hemi or 833.
Cummins maybe. lol
-
