[FOR SALE] Big block 915 heads (NOR CAL)

[MomsDuster]

I have a pair of big block 915 heads. Came off of my running motor. Nothing wrong with them other than one broken keeper from when I pulled the valves, out, and didn’t number or put them back in the holes the came from. Will come with brand new springs from 440 source for a .510 lift cam. Haven’t measured the valves, but will if folks are interested. Don’t know what they’re worth and I’m not in a rush to sell. Also don’t have any interest in shipping them. Northern California pick up.
Asking $500 or reasonable offer

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[oldpunko77]

I M from clearlake basically drop in and go only needed springs back in ?

 

[MomsDuster]

If I was to use them again, I’d have no problem with a quick lapping of the valves, put them back together and run them. They are short one keeper though.

 

[oldpunko77]

I would use those heads on 68 383 and nice street cam to run with.

 

[oldpunko77]

If not sold I would like have those you know christmas is sucking out of my wallet nothing new every year.

 

[MidnightSwinger]

@oldpunko77 if y’all make a deal I’ll be in Vacaville next week picking up my wheel from another member. I could grab them for you.

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[MomsDuster]

Bump

 

[Rebel426]

Bump

Inbox is full

 

[Rapid Robert]

I have some extra keepers & I could send you one, single groove. 7 degree (iirc) if you need either 5/16 or 3/8, I have both.

 

[MomsDuster]

@Rebel426 Inbox is cleaned up a bit.