Big block A body 4 speed Bellhousing

[jtkaaa07]

Guy's, I'm thinking about put my 383 in the dart, and want to go with the 4 speed, what bellhousing will work, and what are you guy's using?

Thanks Jeff

 

[Murray]

You need a 10.5" clutch/ belhousing.

 

[HemiSSDart]

The factory casting number is 2468372 and 2468370 will also work with no issues, the rest of the parts needed are sold by Brewers. There are others that will work, but these are the factory numbers, also used on 65-69 C-body's as well.

 

[Daves69]

.........what are you guy's using

My Barracuda has an 11" set with a Lakewood. You'll need to match things up a bit for them to be compatible.
Some useful info………
Mopar Big-Block A-Body 4-Speed Conversion

 

[Dan Brewer]

You need a 10.5" clutch/ belhousing.

If your starting from scratch this is the best fit. As mentioned above, 370 or 370 casting numbers work. 513 alum bell will also work with an adapter ring or retainer change as that one has the 4.805 retainer register. We also make new 10.5" bells with both size retainer bore's, often less expensive than guys are asking for used ones that need threads repaired.

 

[jtkaaa07]

Thank’s Dan, yes I just seen the new bellhousings on your website, what clutch fork works with them?

 

[Dan Brewer]

Thank’s Dan, yes I just seen the new bellhousings on your website, what clutch fork works with them?

66-UP B/E body fork, s/a A bb. Our part number #CF702N

 

[Greg55_99]

Some more info;
Cheapest way to get a bellhousing on a 440 Dart

Greg

 

[toolmanmike]

66-UP B/E body fork, s/a A bb. Our part number #CF702N

Welcome to FABO Dan! Great to have you here.