Body panels and Frame rails

[crackedback]

Inner fenders with firewall extension for an A body. These are from a 72 Scamp. Will work for any a body 67-76. Surface patina only.

Don't ask about the bumper, it's gone.

$125 each plus shipping from Indio, CA
---------------------------------------------------

Wheelhouses for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Cut out at spot welds. AMD get 125 per half so $250 for each side.

NO RUST!

$125 each plus shipping from Indio, CA
---------------------------------------------------

Complete floor pan for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Removed at spot welds.

AMD gets over $400 for the same panel plus about 120+ to ship

Mine is $225 + shipping via greyhound which usually runs at most around $75 anywhere in the continental US. EX: I shipped a floor pan to PA for about $60
---------------------------------------------------

Rear floor pan section for a Dart or Scamp. no Rust on this one at all. Super clean replacement for the rear footwell area.

$100 + shipping from Indio, CA
--------------------------------------------------

Rear Frame caps section including extensions, goes behind bumper. Nice clean piece from a CA desert car.

AMD gets $199 for the main panel and another $40 for the extensions

MY price ---- $100 + shipping
-------------------------------------------

Upper control arm mount sections. I have a drivers and Passenger side. Will cut them out of the pictured rail wherever you want.

One vendor was discussing fabbing these up and the est. price was $169

Mine $60 each + shipping from Indio, CA

-------------------------------------------------

67-76 A body Rear Frame Rails. Great shape, surface rust only, NO ROT.

$125 EACH + shipping from Indio, CA

------------------------------------------------

67-76 Radiator yoke for a 26" radiator.

$75 + shipping from Indio, CA

-------------------------------------------------

Cowl section from a Duster. Should fit Demon and Dart Sports. NO RUST. Has the upper and lower cowl sections including where the vent boxes attach.

$75 + shipping from Indio, CA

-------------------------------------------------

Inner fenders for an A body. These are from a 73 Duster. Will work for any a body 67-76. Only have the Pass side left, drivers side sold.

$80 plus shipping from Indio, CA

------------------------------------------------

PM or e-mail to robule1 at yahoo dot com

 

[crackedback]

Bump

 

[crackedback]

Bump

Sold the blue radiator yoke

 

[mo.muscle]

I need the torsion bar cross member if it is in good shape. If it is in good shape what do you wan't for it and how much to ship.

 

[crackedback]

Bump

 

[340_Swinger]

front frame rail needed- a body- drvers side- needs to be good on the end that welds to the torsion bar mount. I need atleast 27 inches up from the torsion bar mount. would rather buy entire rail if it is available.

 

[crackedback]

This has been sold

 

[68fsh]

I'm looking at the picture with cowl for a duster but in the background I see what I think
is a blue barracuda rear trunk section. Do you still have it? If so,
is it for a notchback or fastback. Lmk, I am interested. Thank you

 

[dartman 440]

whats the status on the front under the rear seat panel for the duster , has this been sold , been trying to contact you but have had no luck , thanks ed

 

[crackedback]

Cowl has been sold.