Borgeson or Firm Feel steering?

-
Dartvader440gt

Dartvader440gt

Well-Known Member
Joined
Jul 17, 2013
Messages
300
Reaction score
308
Location
Tiverton
On my 69 Dart resto. Since I am replacing the steering box, the old one is leaking and has play in it, should I go with Borgeson or Firm Feel? I know the Borgeson is smaller and lighter. Other than the column steering rod modification is there anything else I need to watch for? Is the header clearance better? I have Firm Feel in my 69 Sport Satellite convert and it's been great.

I have the K-frame out and will re-enforce with some extra welding that I've seen in other posts.
What are your thoughts?

IMG_5152.jpg
 
I love my Borgeson. Big time quick ratio WITH assist.
 
I installed a Borgeson in my 'vert. It was great. Firm and precise, with a quick ratio. Really, it's a better setup for windy roads than my fastback with manual steering, which, while precise, is dog slow.
 
I am often surprised to hear that guys haven't heard that the Borgeson unit can be bought and installed without cutting the column. Where have you been? It has been at least 10 years that the universal coupler has been available. Peter Bergman, a sponsor of this site, sells a complete kit with the coupler included. This makes the Borgeson unit a total bolt in deal, reversible if you ever want to use the steering box somewhere else.
No matter what they do, Firm Feel will always have that free play in the middle of travel. This is a design feature/defect of the factory unit and no parts swapping or machining can overcome it. The Borgeson is an improved design. No slop and the ratio is better.
 
Bergman Auto Craft sells a Borgeson coupler that attaches to column like a stock coupler. So your steering shaft doesn't need to be modified. I went from manual to power and just slid the shaft in to reduce length. Zero mods to anything on the car none.

PXL_20240207_024619416.jpg
 
Oh and Bergman coupler uses a set screw vs a roll pin. So no more pounding pin in and out to remove coupler from steering box. Back set screw out pull coupler off steering box easy peasy pain free.
 
Last edited:
I have a Firm Feel Stage 2 PS box in my '70 Duster, it's great but if I did it again I'd go with the Borgeson. Too bad it didn't exist back in 2008, that was one of the first upgrades I did to my car.
 
I have a flaming river power box on my B Body it’s Meh. I’d go with a borgeson one if I had a do over.
 
You must log in or register to reply here.
-

Back
Top