How do you like them? Also are you running the stock shackles?Yes, I am. What is your question?
Yes very much. I have a ‘71 Duster Nhra stock eliminator car, I bought the correct shackles from Calvert when I bought the springs. Be careful when buying the springs, I bought the “0” height spring and had tire clearance issues. The +1” will give you all the clearance you need and a nice ride height. They work great, I’ve been 1.43 60’ best so far.How do you like them? Also are you running the stock shackles?
Yes very much. I have a ‘71 Duster Nhra stock eliminator car, I bought the correct shackles from Calvert when I bought the springs. Be careful when buying the springs, I bought the “0” height spring and had tire clearance issues. The +1” will give you all the clearance you need and a nice ride height. They work great, I’ve been 1.43 60’ best so far.
Yes very much. I have a ‘71 Duster Nhra stock eliminator car, I bought the correct shackles from Calvert when I bought the springs. Be careful when buying the springs, I bought the “0” height spring and had tire clearance issues. The +1” will give you all the clearance you need and a nice ride height. They work great, I’ve been 1.43 60’ best so far.
Yes very much. I have a ‘71 Duster Nhra stock eliminator car, I bought the correct shackles from Calvert when I bought the springs. Be careful when buying the springs, I bought the “0” height spring and had tire clearance issues. The +1” will give you all the clearance you need and a nice ride height. They work great, I’ve been 1.43 60’ best so far.
I have a 73 Duster stocker in pieces but I have Comp slide-a-links for it. Have 8 3/4 with 4.88s or a dana 60 for it. Will probably go to the dana eventually.
It has a pair of 003 super stock Springs under it at the moment.
Here’s a picture of my car with the Calvert 0 height springs.
Yellow rose is right, the caltracs are a rough ride around the pits. On the street they are going to be quite stiff.
View attachment 1715616001
Just put a set of 4:88 in the Dana and forget about it. I have an 8 3/4 and i just broke it.I have a 73 Duster stocker in pieces but I have Comp slide-a-links for it. Have 8 3/4 with 4.88s or a dana 60 for it. Will probably go to the dana eventually.
It has a pair of 003 super stock Springs under it at the moment.
Looks good, is that one of those Canadian 340 twisters. Like big foot and the lochness monster.I picked up the springs from a classified site here. They are new and never installed. Not sure on the hight... but going to buy the Caltracs and shackles. My ride is a street thrasher with a solid roller iron headed 340 with 4.88s in the rear
View attachment 1715615351