Can I get some ID help??

[4spdragtop]

Ok, Im weeding thru some stuff trying to get rid of extras etc but Im not sure what all these are from.
Antenna, there is a part # 3501286 on it, bezel has 3501287, non telescoping
Choke cable
Dipstick and tube, tube is 16 1/2" tube with tang is 23"
Brake rods??? 3 of them 2 are similar(approx 15") 3rd one is 14" and has more of an offset
Kickdown...Im thinking bigblock/727, not sure I have had it kicking around for a while.

Thanks for the help!!

 

[Oklacarcollecto]

Antenna Bezel 3501287 is MOST 74-86.

 

[jaws]

Dip stick looks big block, but looks like the bottom is broken off. The three rods are clutch rods. Looks like one A body and two B body.

 

[No name needed]

Sorry I can't be of much help. The yellow piece with the numbers though is a tape measure. Hope that helps.

 

[4spdragtop]

Dip stick looks big block, but looks like the bottom is broken off. The three rods are clutch rods. Looks like one A body and two B body.

I thought bottom might be broken off to, but it has a mounting tab, so Im not sure if the bottom should be tapered or not...thanks Dave!

Thanks Ray for the help with the tape measure, but what kind is it?? LOL

Thanks Red for the antenna

 

[69DARTS]

Sorry I can't be of much help. The yellow piece with the numbers though is a tape measure. Hope that helps.

now that was funny rayer:

 

[Oklacarcollecto]

I thought bottom might be broken off to, but it has a mounting tab, so Im not sure if the bottom should be tapered or not...thanks Dave!

Thanks Ray for the help with the tape measure, but what kind is it?? LOL

Thanks Red for the antenna

The tape measure looks like a Stanley.

 

[Snake]

You sure have a lot of parts Steve.

 

[4spdragtop]

Dip stick looks big block, but looks like the bottom is broken off. The three rods are clutch rods. Looks like one A body and two B body.

Any idea whether there is a difference between big block and small block clutch rods??

 

[No name needed]

Thanks Ray for the help with the tape measure, but what kind is it?? LOL

Perhaps a Stanley but I need a better picture to be sure.
Anyway free bump.

 

[74DartSwinger360]

What is your price on the choke cable?

 

[TrailBeast]

the tape measure looks like a stanley.

 

[4spdragtop]

What is your price on the choke cable?

It's free, but spoken for, I have to get a ship quote to the member. Here is a link to more stuff....chk out all my for sale ads, there might be something in there for you.

http://www.forabodiesonly.com/mopar/showthread.php?t=194987

Thanks
Steve

 

[fanofpetty]

the clutch rods for A body and B body as well as E body are all different

 

[4spdragtop]

the clutch rods for A body and B body as well as E body are all different

2 of them are identical the other one(top in the pics) is slightly shorter...are big block and small block the same??

Thanks

 

[fanofpetty]

I belive the clutch rods are the same between small block and big block, because the Z bar is still in the same location regaurdless of which engine.

 

[fanofpetty]

Check out Brewer's website. They have some pictures and measurements of each one.

 

[4spdragtop]

Check out Brewer's website. They have some pictures and measurements of each one.

Good idea!!! Thanks, going there now...

 

[4spdragtop]

Thanks everyone looks like the top clutch rod is for small block and the bottom 2 70-4 E body and 71-4 B body...Im assuming big block, but gotta call brewers to clarify

Any idea on the 1 pc kickdown linkage??

 

[4spdragtop]

Anyone know what the linkage is from??