Mopar to ya
Well-Known Member
I have an Edelbrock 1406 600 cfm carb on my Dart right now. It runs and idles beautifully. It is adjusted very well, but the mixture screws are way out. When I floor it it immediately winds up, I start to fishtail, and about when it begins to straighten out it starts to cough and sputter. I am guessing a lean backfire and thinking maybe the carb is too small, or maybe I need to re-jet it. I have no idea what the jets are now, I assume whatever came stock in the carb. I am looking at an Eddy 1413 800 cfm because I like my set up and it will bolt right in with all the same linkages. I am looking for advice, even though I can already sense the can opening and the worms sneaking out ...
73 Dart Sport
318
Edelbrock RPM air gap intake
Edelbrock 1406 600 cfm carb
Comp Cams XE268H cam and lifters
Hooker competition headers with 2 1/2" exhaust
Stock 904 with 2800 stall
Dana 60 with 4.10
73 Dart Sport
318
Edelbrock RPM air gap intake
Edelbrock 1406 600 cfm carb
Comp Cams XE268H cam and lifters
Hooker competition headers with 2 1/2" exhaust
Stock 904 with 2800 stall
Dana 60 with 4.10