Classic Industries '73-'76 Dart Headliner?

[cletus]

Has anyone used this or one like it?

http://www.classicindustries.com/product/mopar/a-body-dart-1963-76/parts/ma205501.html

I think this is what I will need, all my original headliner and sail panels are gone, they were garbage. I don't remember there being any mounting hardware, but it's been years since I pulled it.

I still have the trim pieces that go around the inside of the windows, beyond that will there be anything else I will need?

How difficult are they to install?

Thanks for any information on this.

- Steve

 

[76orangewagon]

Has anyone used this or one like it?

http://www.classicindustries.com/product/mopar/a-body-dart-1963-76/parts/ma205501.html

I think this is what I will need, all my original headliner and sail panels are gone, they were garbage. I don't remember there being any mounting hardware, but it's been years since I pulled it.

I still have the trim pieces that go around the inside of the windows, beyond that will there be anything else I will need?

How difficult are they to install?

Thanks for any information on this.

- Steve

I installed one a month or so ago, I needed to trim the corners to get it to fit a little better. As far as holding it in, the front and rear glass windshield seal, sun visors, and dome light hold it in along with the side trim.

 

[cletus]

I installed one a month or so ago, I needed to trim the corners to get it to fit a little better. As far as holding it in, the front and rear glass windshield seal, sun visors, and dome light hold it in along with the side trim.

Did you have to cut out for the visors and dome light or were the holes already there?

 

[76orangewagon]

Did you have to cut out for the visors and dome light or were the holes already there?

The holes/cutouts were already precut...as were the upper shoulder seat belt bolt holes. The rear view mirror was not precut.

 

[cletus]

Thank You!