Hi all wondering if anyone has or has seen colored schematic for 67 barracuda. I found one for 69 but can't find 67. I checked mymopar.com already.
Thanks
Steve
Thanks
Steve
Colored schematics 67 barracuda
- Thread starter 4spdragtop
- Start date
-
Is it the paint chip chart your referring to??
Steve
Try Classic Industries, I think they have them on their site. I don't recall what all years they had. They are plastic laminated.
Dave.
Try Classic Industries, I think they have them on their site. I don't recall what all years they had. They are plastic laminated.
Dave.
g413
Well-Known Member
Dave is right. I got my color, laminated, wiring diagram, 11x17, for a 67 Barracuda and I'm very satisfied with it.
Plymouth All Models Parts | Ml13079 | Classic Industries
Last edited:
R4Sedan
Larry
Yeah, Steve. I have one for a '70 nicely laminated. Can't remember where I got it from. But Classic industries or Year One would probably have them. And they sure are nice. Good luck Buddy.
Thanks guys. Zman, it's the electrical schematics is what I'm looking for.
I have a 67 Plymouth FSM, but it's a reprint and a POS. Also it doesn't have any barracuda schematics at all. I have specific 67 barracuda schematics (some) but they aren't color coded. I have a laminate at my disposal, so I was hoping to find colored/layered ones.
While googling, I came across a couple of great barracuda resto sites.
One is Mike Mosleys I believe (member here)
@mosleyme
1969 Plymouth Barracuda Restoration
The other is Jeff Ramins, both great sites, skills and documentation is top notch!
Jeff is a member here as well, but I can't find his "handle"
Jeff's 1968 Barracuda
I'll stick with the old black and white for 67 for now. Got it laminated, as well as 69 barracuda color.
Thanks guys, check above sites out.
I have a 67 Plymouth FSM, but it's a reprint and a POS. Also it doesn't have any barracuda schematics at all. I have specific 67 barracuda schematics (some) but they aren't color coded. I have a laminate at my disposal, so I was hoping to find colored/layered ones.
While googling, I came across a couple of great barracuda resto sites.
One is Mike Mosleys I believe (member here)
@mosleyme
1969 Plymouth Barracuda Restoration
The other is Jeff Ramins, both great sites, skills and documentation is top notch!
Jeff is a member here as well, but I can't find his "handle"
Jeff's 1968 Barracuda
I'll stick with the old black and white for 67 for now. Got it laminated, as well as 69 barracuda color.
Thanks guys, check above sites out.
Steve, I do not have the Accessory wiring details but here is what was available from the updated 67 supplemental manual that I cadded. Seems I have posted them many times before.
Last edited:
here are the 68 and 69 drawing as well.
I thought you had done the 69, I didn't realize you did 7 and 8 as well. I did do a search with no luck. Search box for fabo is brutal to say the least. Those 3 schematics should be a sticky, but apparently sticks are frowned upon lol.
Thanks!
Thanks!
Lol,
You can send these to a local print shop and have them plotted. They are native 30x42 inches. Even the blind like me can read them at that size.
I'll look tomorrow, I have a colored one of those for a 67 Barracuda downstairs. It came with the car. I'll get a color copied made and mail it to you. I'll let you know, and if successful all I'll need is your address.
Peter Bates
1973 Cuda owner for 36yrs
Try this place. It's where I downloaded my noncolor ones and they worked just fine for me.
Mopar Wiring Diagrams - MyMopar.com - Dodge Plymouth Wiring Diagrams
Mopar Wiring Diagrams - MyMopar.com - Dodge Plymouth Wiring Diagrams
If anyone has the accessory diagrams for a 67 I would like to have them to cad out. The ones I posted were from the 67 supplemental shop manual. I have never found any diagrams for the accessory wiring like the 68/69 manuals had.
Last edited:
The color set for 69 Barracuda on MyMopar is the set I cadded, not sure what revision. It should be rev 3. Surprised they have not put my 67 and 68 set on there as well.
They are cadded from the original manuals and revised as needed for either my error or a factory manual error. Feedback Good or bad is well received.
They are cadded from the original manuals and revised as needed for either my error or a factory manual error. Feedback Good or bad is well received.
Last edited:
Thanks again guys, very well done Gerald! I printed off already lol. I'll blow them up a couple % and see how they turn out.
Zman, thank you for the offer! Dont go to that trouble, but post a pic of yours when you can.
Cheers!
Zman, thank you for the offer! Dont go to that trouble, but post a pic of yours when you can.
Cheers!
I was surprised as well. I thought I recognized the 69 lol. Printed and laminated at work last night. Love the midnight shift lol.
I saw rev 3 somewhere.
I saw rev 3 somewhere.
I'll see if I can find any.
Thanks, only want “factory” literature to re-cad in color.
In 68/69 the pages are separate but I combine them to retrace in cad. The 67 manual was totally different.
This in Angel Garrido's website, not mine.
I bought my car in 1988 for $350.
General thread on recent work on my car starting in 2011:
1968 Barracuda Notch - Plano, TX
The thread meanders, and it is hard to find specific topics so I started making garages:
Some pictures of my car between 1998 and 2011:
1968 Barracuda Notchback: Original Paint, 1988-2012
Overview of 9 months of paint and body work:
1968 Barracuda Notchback: Paint and Body 2014
Engine pictures from 1994 to current:
Engine Pictures
Front fender modification:
1968 Barracuda Front Fender Modification for 26" Tires
Door latch PSA:
Door Latch Adjustment - 1968 Barracuda
Gauge cluster information:
1968 Barracuda Gauge Cluster
Thanx.
I have that suppllement and that is what I used to cad the color traces, it is not complete.
The 67 was ahead of itself a little!
Harry McCurdy
Active Member
I'd sure appreciate one as well. We're putting a new wiring harness in my 67 Fastback because all the wires were cut , & or melted . They had it hot wired so headlights and taillights worked while it was running . It's a mess . Harry
Thanks, if you find it(no rush) may be take a pic and post here?
I've went and upgraded to 70+ alt and vr, so I'll have to "blend" schematics lol
Thanks again.
I've went and upgraded to 70+ alt and vr, so I'll have to "blend" schematics lol
Thanks again.
-
