Comp Cams Pro Magnum 1.5 Ratio Rocker Arms

-
6

69dodgedart360

Well-Known Member
Joined
Oct 8, 2006
Messages
300
Reaction score
90
Location
Milpitas
Just wondering if anyone who has these rocker arms had to shim the rockers to make them work? I am looking up the description on these and it doesn't look like they come with shims and Comp doesn't sell them either so I am a little confused. I bought some 440source rockers for my 440 and had to shim them to line up the rocker arms perfectly over the valve and am wondering if anyone who has these had can tell me if they had to shim them or they lined up perfectly over the valve without any shims? This is going on my LA 360 with X Heads. Any information or personal experience with these would be great. Part number is 1622-16.

Thanks
 
I have them no shimming need on my Edelbrock heads..
 
Great, thanks for the info. I just got them and it looks like they come with 8 spacers to go in between the rocker arms and I have to check that I have .030 clearance between them. Much easier install than my 440source rockers.
 
You must log in or register to reply here.
-

Back
Top