Selling a complete LA 408 Stroker from carb to oil pan, pulleys to flexplate. This engine was built in 2011 and has very few miles on it. Runs great, doesn't burn oil or run hot with tire roasting power.
Its currently sitting in my 70 Dart Swinger so you can hear it run or take it for a drive if you're local. Will pull as soon as it is sold.
I have all the receipts for the parts that were used on the build and will go with the engine. I also have a fresh, low mileage A508 with 3000 stall converter (also in the car) that I can include in the sale for $1000 more.
Scat rotating assembly with forged pistons and cast crank, forged I-Beam rods, ported J heads with 2.02 intake valves, Comp Cams solid lifter cam and Hughes roller rockers, Mopar Performance valve covers, Edelbrock RPM Air Gap intake, 750cfm Race Demon carb, Pertronix electronic distributor and more.
Located just north of Seattle and yes, I will strap it to a pallet and ship at the buyers cost. $4000 or best offer.
Thank you,
Bill
Its currently sitting in my 70 Dart Swinger so you can hear it run or take it for a drive if you're local. Will pull as soon as it is sold.
I have all the receipts for the parts that were used on the build and will go with the engine. I also have a fresh, low mileage A508 with 3000 stall converter (also in the car) that I can include in the sale for $1000 more.
Scat rotating assembly with forged pistons and cast crank, forged I-Beam rods, ported J heads with 2.02 intake valves, Comp Cams solid lifter cam and Hughes roller rockers, Mopar Performance valve covers, Edelbrock RPM Air Gap intake, 750cfm Race Demon carb, Pertronix electronic distributor and more.
Located just north of Seattle and yes, I will strap it to a pallet and ship at the buyers cost. $4000 or best offer.
Thank you,
Bill
Last edited:
