The Furnace Well-Known Member Joined Nov 13, 2014 Messages 69 Reaction score 1 Location michigan May 24, 2015 #1 Does the cone side go towards the manifold or away from it?
M moe7404 moe7404 Joined Dec 14, 2012 Messages 688 Reaction score 107 Location wichita, ks May 24, 2015 #2 the large dia goes to the manifold. and DO use anti-seize compound on all threads and washers. tighten the bolts to 70-80 % of full torque at first. after 4-5 full heat cycles take to full torque.
the large dia goes to the manifold. and DO use anti-seize compound on all threads and washers. tighten the bolts to 70-80 % of full torque at first. after 4-5 full heat cycles take to full torque.