Console tach placement

-
Joey4speed

Joey4speed

FABO Gold Member
FABO Gold Member
Joined
Jul 17, 2018
Messages
2,018
Reaction score
1,831
Location
Coastal NC
Im about to install my N85 console tack on my new console top. It is a 69 Dart with a 4 speed.
Does anyone have any insight on where it should be mounted, or maybe a measurement or template?
I've seen a few pics, mostly automatics, but its difficult to know the correct angle before I drill through the new top.
Thanks guys
 
Take cover plate off console, flip it over, and look at the underside. Theres markings where it needs to be drilled.
 
Here's some measurements I used, courtesy of Jim Lusk...and lastly, a pic of mine installed....

Do you have all the other required parts to mount it?


ConsoleTachHole1.jpg


ConsoleTachHoleMeasurement1.jpg


ConsoleTachHoleMeasurement2.jpg


ConsoleTachInCar2.JPG


Do you have all the other required parts to mount it?

IMG_2798.JPG
 
Last edited:
Yes. I believe I do have all the parts.
Gasket.
Hardware.
Base.
I'll have to check on the spring, I think its behind the washer and bolt.
 
You must log in or register to reply here.
-

Back
Top