[WANTED] Console tachometer base
- Thread starter rlcbit
- Start date
-
- Status
I have reproductions - Aluminum or Stainless.
67-68 or 69 up.
67-68 have alignment tabs on the bottom.
They will come raw metal and will need polishing.
The stainless can be sanded to a nice finish, or polished to a chrome finish.
Same with the aluminum.
Let me know if you are interested.
This is a 67-68 stainless unpolished version. (What you will receive)
This is a 69 up version poorly polished. But gives an idea what can be done.
I'll also include a plastic spacer and the needed screws.
67-68 or 69 up.
67-68 have alignment tabs on the bottom.
They will come raw metal and will need polishing.
The stainless can be sanded to a nice finish, or polished to a chrome finish.
Same with the aluminum.
Let me know if you are interested.
This is a 67-68 stainless unpolished version. (What you will receive)
This is a 69 up version poorly polished. But gives an idea what can be done.
I'll also include a plastic spacer and the needed screws.
Stainless = $55.00 shipped
Aluminum = $40.00 shipped
The parts are made to order so the turnaround is about 2 weeks
also if you are putting it on a console that did not come from the factory with one, I can supply a template as well (no additional charge)
Aluminum = $40.00 shipped
The parts are made to order so the turnaround is about 2 weeks
also if you are putting it on a console that did not come from the factory with one, I can supply a template as well (no additional charge)
My money is they are the same housing thus the same mounting.
Last edited:
- Status
-
