[SOLD] control arms, torsion bars, shocks, UCA's and LCA's

[Johnny Mac]

Hi all,

For sale is a set of up upper control arms, and lower control arms off of a 74 dart. I'm moving to an HDK setup so i have no use for these anymore. The 1974 dart they came off of is a 30K mile car that has seen nothing but the drag strip for the past 5 or so years. They are as they came off of the car when i disassembled the front end this winter for the HDK.

Asking $250 for the uca's lca's and i'll even give you the shocks/ supports.

for another 75 i'll toss in the torsion bars (was a 6 cyl car) ran the numbers on the bars and they come up as 6 cyl, and non A/C 318 cars.

heavy stuff so prefer not to ship. located in 44260, and work in 44460.
Thanks!

 

[Johnny Mac]

Should point out that you can have the tie rod ends in the pic, and that yes, this includes both lca's...just didnt get them both in the pic.

 

[Johnny Mac]

will separate. i guess i can also look into shipping on the CA's. the torsion bars are probably too heavy/large

 

[Johnny Mac]

Reduced 200 for the arms. 50 for the bars

 

[Bmatetic]

are the uppers large ball joint

 

[Johnny Mac]

are the uppers large ball joint

Yup. Guess i should have mentioned that. I ran them with a disc brake setup from a 73 challenger

 

[Johnny Mac]

As requested by another member, and for a point of reference for anyone else. Shipping was quoted as 38 bucks to OH to IN. that was everything minus shocks and torsion bars.

 

[Johnny Mac]

still have the torsion bars. everything else is gone