Rodsaknockin
Well-Known Member
What kind of rads are you guys using for a small block oem,aluminum , or a rad shop custom built thanks in advance
Ok I will have a look there thanksI ordered a 26" from O, Reilly's for about 200 bucks.
It did require drilling new mounting holes though because of it's width, but at least I have radiator core over the entire opening.
Ok I will have a look there thanks
Cool I will check that out as wellIf you don't mind doing a bit of work the ECP radiator is nice.
Found it but they don't know if it will be back in stock thanksI use these, no shroud, runs 190 in 90* weather.. No drilling nec, is proper rad for 1970 and newer application..
https://www.amazon.com/gp/product/B000C7TVNS/?tag=joeychgo-20
cheers
Sorry, try this, changed link, and edited previous post. cheers
-
Thanks for the help and sorry I didn't get back sooner I was down and out with strep throat on the mend now.
https://www.amazon.com/dp/B000C7TVNS/?tag=joeychgo-20
shows 2 in stock