[WANTED] Cover Plate for SBM 904 Transmission

[Odin]

I need the correct front cover plate for a small block 904 transmission.
I already have the correct one for a 727 (in the photo) but still need the correct one for the 904 with the slightly shorter inspection opening at the bottom.

 

[Oldmanmopar]

If you are going to run a 10 inch or smaller converter your 727 cover will rub,Yours has the narrow travel passage

 

[Odin]

If you are going to run a 10 inch or smaller converter your 727 cover will rub,Yours has the narrow travel passage

I do not know what the travel passage is?
I may have made things confusing (at least I am now unclear) because I have two separate builds in my garage or in my head; 360/727 and 318/904.
If the above plate is for a SB/727 and I know the inspection cover on the left fits that plate, will this cover plate and the inspection cover on the left have rubbing issues on the 360/727 build?
I know the inspection cover on the right is too small for that plate, but assume it will fit the plate meant for a 904. No?.

 

[DartSport.74]

I couldn’t find a new transmission plate for a 904 in the US. I searched the internet, and found a Mopar shop in Australia that had new plates for 26.00 and 25.00 shipping. I thought it was a good deal for 51.00.

Torque Converter / Transmission Dust Cover Plate - Suits V8 904 Transmission