Cruise Control Switch Connector

[scatpackbee]

Does anyone have the other end with wires (female end) for this connector for a cruise control switch, or know the part number of the corresponding connector?

Thank you

 

[KitCarlson]

That is a polarized connector, it has two sets of male pins, and two female pins. To find connectors it helps to have the pin diameter and spacing.

Radio Shack sells similar 4-pin connectors, but you will need to buy male and female, to get the pins to swap in the housings, or use new housings. There are mounting tabs that can be cut off, to make them more similar to originals.
https://www.radioshack.com/collections/maker-parts-kits/products/radioshack-4-position-female-polarized-connector?variant=5717408965
https://www.radioshack.com/products/radioshack-4-position-male-polarized-connector?variant=5717407365

 

[67Dart273]

If you don't have the rest of whatever it connects into, why not just install a different connector. Most of us call those "Molex" even though it may or may not actually be so

 

[scatpackbee]

Thanks for your replies guys.

I was considering adding a new packard style connector, but don‘t really want to hack up a NOS cruise switch.

I really want to find a '70 style speed control switch like this one and replace the '75 style, so I'm trying to avoid messing up the '75 switch.