Dart Parts

-
I would say here is a good place to start and post what parts you are looking for in our Parts needed thread or look in the parts for sale threads , Let me welcome you to this great site, Jump on in, look around and enjoy
 
Hate to sound like a broken record, But this is a the largest online community of A body enthusiast I have ever found. Lots of parts in the classified section. Also post a wanted ad.
 
Here's what I have that I can sell, all are from the same 72 swinger that I parted out a few years ago, and have been in dry storage ever since.

Both front fenders in very good condition with top mounter turn signal indicators.
Hood (small very repairable dent at front/center edge.
All hood mounting hardware and hinges, and latches.
Front parking lights
Headlight buckets, grill with headlight surrounds and buckets
Both doors with locks and glass and vent windows.
Hinges
Windshield
Rear quarter glass
Rear Window
Steering column
Blue 3 horn button Steering wheel (missing center trim cover)
Black 3 horn steering wheel, complete.
Two complete dash gauge sets (wood grain).
Heater control panel
Heater and A/C control panel
2 glove compartment doors (wood grain)
New Defogger vents
New Dome light with lens
Trunk lid with hinges, lock and key (keyed the same as doors.
Black sun visors
Blue sun visors
Black door panels
Black kick panels
Black rear side panels.
New sail panels (for inside "C" pillar)
Various exterior trim pieces.
Side marker lights
Tail light assemblies
Complete 318 2bbl engine, needs to be rebuilt, but is all there.
904 Torqueflight
2 Under dash vent boxes with doors
front and rear bumpers (need to be rechromed).
A/c vents
1986 318/302 heads.
1986 318 engine bare engine block
318 truck oil pan
318 truck factory exhaust manifolds
a/c compressor
Dart window cranks.
Door and back seat arm rests.
A body window regulators, front and rear
A bunch of misc. brackets and mounting hardware....


I see you live in Jacksonville. I'm in Macon, Ga. It's about 4 hours away. I'd prefer not to ship anything, and I'd rather deal face to face, anyway. I don't use paypal any longer, either. Delivery is possible, too.

PM me. Maybe we can help each other out.
 
Thanks guys and another question.
Im trying to figure wether i should go with a higher stall converter for my 318. Its got eldelbrock rpm performer aluminum heads and a .462 comp cam along with a 9.5 comprssion ratio bored .30 over. If not stock then whats a good stall converter???
 
72'_Swinger_318 said:
Thanks guys and another question.
Im trying to figure wether i should go with a higher stall converter for my 318. Its got eldelbrock rpm performer aluminum heads and a .462 comp cam along with a 9.5 comprssion ratio bored .30 over. If not stock then whats a good stall converter???
Click to expand...

Knowing what rear axle ratio would probably help also FWIW
 
You must log in or register to reply here.
-

Back
Top