harrytoes
Well-Known Member
Trying to install my dash bezel. My dad had it rebuilt. The screw holes at the top are pretty big. Not sure what screw goes in there and how it attaches to the dash.
Dash bezel attachment
- Thread starter harrytoes
- Start date
-
There is a metal plate that should be screwed to the top of the bezel inside. The screws clamp on that. The big holes in the plastic are just for access. Sounds like you may be missing the plate.
harrytoes
Well-Known Member
Anyone have a pic of that plate?
340wedge
Well-Known Member
- Joined
- Nov 14, 2004
- Messages
- 1,158
- Reaction score
- 847
harrytoes
Well-Known Member
Is that riveted on?
340wedge
Well-Known Member
- Joined
- Nov 14, 2004
- Messages
- 1,158
- Reaction score
- 847
It is but you could probably get away with some very small screws if needed.
Wagon of Death
Aussie Barracuda Fisherman
Mines rivetted too, as 340 said, carefully wind in some self tappers
harrytoes
Well-Known Member
Not sure where that sheet metal is. Probably still on he old bezel. Need to find or get a new one
71DodgeDemon
Member
- Joined
- Aug 13, 2006
- Messages
- 17
- Reaction score
- 1
Barry toes where did you get it refurbished. The bezel? I am looking for that on mine... thx.
My car ='68 cuda. Top plate is screwed on as seen in pics. Cluster is attached with eight special screws. Top row of screws has U-clips in dash to screw into, but bottom row screws directly into dash. Hope pics help.
-
