Difference in Oil pan gaskets

-

Mopar Momzee

Well-Known Member
Joined
Jul 20, 2019
Messages
619
Reaction score
462
Location
Vacaville
Car is a 1968 dart oil pan is a 394. What year did they start using 2 nub front and rear gaskets vs 6 nub? Has anyone used the 2 nub on a 6 nub location? I ordered the correct gaskets just wanted some info. Thanks jesse
IMG_1907.jpeg
IMG_1909.jpeg
 
Well there supposed to but seems my kit has the one, but just found the ones removed from the old pan and they used the curved with 2 nubs on it not sure how much it maters or what one seals better. Just looking for some advice.
 
i want to say the move from the multi-pokey seal to the lip seal with just two (bigger) nubs was about 72(?)

i've done every which way on them darn things over the years: cut the nubs off the early ones, enlarged the holes for the later ones, drilled the pan for the early ones, etc. etc. etc.

i like to run the correct one for the pan. or if you're in a jam, and don't want to wait you can just run a fat bead of rightstuff™
 
Appreciate the feed back seems that what previous owner did used newer for older pan.
 
I've used both and not necessarily noticed a difference between the 2, BUT that being said if I had a choice I would go with the multi nippled version.
 
-
Back
Top