[WANTED] distribution blocks drum brake cars

-
Status
Not open for further replies.
barbee6043

barbee6043

barbee 6043
FABO Gold Member
Joined
Jul 20, 2008
Messages
22,104
Reaction score
12,842
Location
Shepherd, Texas ( SE Tx)
Rating - 100%
17   0   0
Contact seller
Need two for 64 Belvedere and 62 Dart both B bodies but all the same I bet for A or B drum brake cars. Yes I know Inline Tube has new ones for $35 ea but good used will be fine. Had some but used up. No bone yards around here with old stuff.
Just wondering if anyone has some they can ship??
 
I have a 65 a body single pot drum-drum
 
this one?
ive got a couple.
100_6432.jpeg
 
I have one from my old '65 Belvedere..... Been in my brass part collection for poss. 20 years! Let me know if your interested & I'll send you pictures of it.
 
Your 62 & 64 had single reservoir master cylinders, what you need is the later distribution block for a dual reservoir drum brake system. There was a discussion about the early drum brake versus disc brake blocks here about a week ago that showed pictures.
 
Demonracer said:
Your 62 & 64 had single reservoir master cylinders, what you need is the later distribution block for a dual reservoir drum brake system. There was a discussion about the early drum brake versus disc brake blocks here about a week ago that showed pictures.
Click to expand...
I dug threw enough box of parts that I found some dual dist. blocks. What models who knows but I needed block to correspond to the pre bent lines so I just ordered their block I hate flanging brake line with my sorry flanging tool.
I bet all disc brake systems also use a proportioning valve.
 
Yes, there is a distribution block with a built in proportioning valve, but that isn't what you need. I think C bodies & some trucks starting in 66-67 had the dual bowl master cylinders. As far as getting one to fit up to factory bent lines is going to be a REAL shot in the dark.
 
Status
Not open for further replies.
-

Back
Top