Door glass track

[gremlin]

This is on a 68 Dart 2dr hard top.

I took my door apart, and the vent window track plastic, the window is held in with came apart. Where can I get a new one? These doors are off a parts car, and the rubber stop that is sandwitched in the vent window that the door glass hits when you roll it up is missing. Where can I get a new rubber stop? This looks like a lot of fun to put back together...anyone have any pointers on putting it all back together.

 

[Rocky_JS]

check here

http://www.forabodiesonly.com/mopar/showthread.php?t=170550&highlight=glass+run+channel

the only way I know to do these is drop the vent with the door glass in at the same time and is easiest to do with two people.

 

[RedFish]

The rubber wedge at the top corner isn't really a stop, just a seal. The stop is a 'L' shaped piece of steel in the door that limited the regulator up travel. The down stop is a ecentric on the regulator that limits its gear travel.
I have took the top of the vent window frame apart and lifted the door glass out to rebew the forward guides. That's not the corrcet method though.

 

[VDART]

try here for installation:
http://www.forabodiesonly.com/mopar/showthread.php?t=167305

i'll have to check to see if I have the spare vent frames-- they should have that rubber seal, Lawrence