Door glass window help, 1970 dart

[marksmopars]

I am assembling my 70 dart and the door glass guide pins which ride in channel attached to the vent window are ok, but whatever was covering them is history. Does anyone know if these can be bought and where or what to do in the event they aren’t? Any assistance is appreciated.

 

[j_anderson]

These?

I used the set above from DMT. Read the notes in the description. You have to cut them to length and also punch holes for the guides to go through.

 

[marksmopars]

yes, please tell me more.

 

[j_anderson]

yes, please tell me more.

I linked to the site.

You have to install these on the door glass and then install the glass into the wing vent window channel then install the whole assembly in the door.

 

[marksmopars]

Ok missed it as I did look at your thread tho. got it now
Thanks, I appreciate the help.

 

[Dana67Dart]

Some people have used the loop side of self adhesive Velcro in the channel inplace of the mylar strip.

 

[Kendog 170]

Some people have used the loop side of self adhesive Velcro in the channel inplace of the mylar strip.

I'd be willing to try that. My drivers window getting bad. I wish someone who did it made a post.

 

[marksmopars]

I'd be willing to try that. My drivers window getting bad. I wish someone who did it made a post.

I’m going to try and make some on my 3d printer. I will let you know if it works.

 

[dadsbee]

Here's my "step by step" on door glass, when I was putting my Superbird back together...

Broke my 7UP Pop Machine today....

 

[dadsbee]

..and here's where the other side starts...

Broke my 7UP Pop Machine today....