[FOR SALE] Door window regulators
- Thread starter moparmarks
- Start date
-
- Status
BWDart
Well-Known Member
What do they fit?
Most of these are from 70-2 but think 67-76 is the same?
They are different based on model. I have several 67-9 cuda ones and notch,fb,vert are all different. Front to rear as well.
These are from Darts and Dusters.
moparmat2000
Well-Known Member
That's good to know. I thought all 67-72 2 door A body were the same
Now ya got me 2nd guessing myself. I'll chk what I have over the next few days.
I have some 67 Barracuda doors that still have them. I can check them.
Ok I checked the FPM's.
69-72
Dart 2 and 4 door and Vert
Valiant 2 and 4 door
Barracuda H/T, FB and Vert
All take the same 2765792-3
71-2 Dart and Duster FB
3454544-5
So all are the same except FB.
67-8 H/T 2 and 4 door and Vert all take
2583064-5
73 and up are different except 4 door takes the 2765792-3
73 H/T is a one year thing. 74 is different.
Now I need to figure out which are which of what I have. Some have a bigger spring so thinking those are for FB. I'll see if I can find any part numbers.
69-72
Dart 2 and 4 door and Vert
Valiant 2 and 4 door
Barracuda H/T, FB and Vert
All take the same 2765792-3
71-2 Dart and Duster FB
3454544-5
So all are the same except FB.
67-8 H/T 2 and 4 door and Vert all take
2583064-5
73 and up are different except 4 door takes the 2765792-3
73 H/T is a one year thing. 74 is different.
Now I need to figure out which are which of what I have. Some have a bigger spring so thinking those are for FB. I'll see if I can find any part numbers.
Last edited:
Probably have them. Which car and year? That pic looks like for a FB. Both sides?
moparmat2000
Well-Known Member
Good to know, I grabbed the regulators out of the front doors of a 74 dart more door I was junking as spares. They looked the same
easpeed
Well-Known Member
Will they fit 73 dart sport need driver side
moparmat2000
Well-Known Member
See Pic below of duster regulator. These wont fit dart sport, duster or demon either
I'm looking into this. My crash parts book says yes they are the same but as Mat's book shows they are not.
All my FPM are at the shop and need to look at those. Can't find any part numbers on the regulators.
I think I have some loaded Duster doors that I need to dig out of the pile.
All my FPM are at the shop and need to look at those. Can't find any part numbers on the regulators.
I think I have some loaded Duster doors that I need to dig out of the pile.
I've had a lot of Darts but can't think that I got all these regulators from Darts. Maybe.
Also 66-70 B regulators look alot like these so maybe thats what some of these are.
moparmat2000
Well-Known Member
I helped a buddy with a 73 duster. If I remember correctly the regulator assembly had 3 arms each tipped with a roller because these windows dont have a vent window division post to allow the window to ride up and down squarely. This is also the reason the regulator changed on 2 door hardtop darts and scamps in 1973. They did away with the vent window and division post that year. The 4 door hardtop kept the vent glass and division post through probably 1976, using the same 2 door hardtop regulator from 67.
Makes sense.
Okay found out that most of these are actually 66-70 B regulators. Makes since, I've parted out a lot of those. Anywho the A and B regulator are very similar and have the same bolt pattern. main difference is the arm on the A is a little longer and they have a heavier spring. Could probably interchange.
So that being said I've sold a few A regulators and only have a few left.
The rest I'll post over on FBBO.
F/B regulators are the scissor type and different than H/T and Sedan.
So that being said I've sold a few A regulators and only have a few left.
The rest I'll post over on FBBO.
F/B regulators are the scissor type and different than H/T and Sedan.
Bump still available.
Free delivery to the Fall Fling in LA with prepaid.
- Status
-
