Drive shaft questions

[Vandal]

So I have a question, I have a 1970 Dodge Dart sedan and the driveshaft got lost on it, since there isn’t many darts in junk yards can I take off a drive shaft from a newer mopar like a ram truck or something and get my specific yoke and stuff ?

 

[Plymouth 65]

Any capable drive shaft shop can make you one to your exact dimensions and u-joint size preference. 65'

 

[Oldmanmopar]

Post your trans and rear combo someone on this site may have one. It has to be Dart or Scamp. they are 111 wheel base. Baracuda's , Duster's, Demon's, Valiants and Dart sports are 108 wheel base 3 inches shorter. But depending on the combo some will interchange.

 

[kursplat]

Post your trans and rear combo someone on this site may have one.

also FALL FLING is coming up. someone there will probably have one, if the car is stock. i don't know what rear end and transmission you have, so figure that out first. if you have anything non-stock, like the car was originally a 904 trans with a 7 1/4" rear, but now has an 8 3/4" you need to measure for it, (you should anyway). then you can post a WANTED ad in the for sale section and take a tape measure to the fling and look around. if you find a longer one you can have it shortened. since you're in los angeles i'd recommend Driveshaft Specialist. post pics if you don't know what you have