[WANTED] Driveshaft for 340/A833/8.75 combo

[go-fish]

I am soon going to be swapping my 8.24 out for a 8.75 rearend. I will be needing a driveshaft for my 73 340 Duster with an A833.

If you want to trade or buy my 8-1/4 it will be available after I install the 8-3/4 as it's a driving car.

 

[go-fish]

48.96” ?

Any 108” car with a 904, 833, or 230 I can use.

 

[AJ/FormS]

with matching yokes, this is a bolt-in, unless your car is a tail-dragger, then it get a lil iffy.

 

[72bluNblu]

48.96” ?

Any 108” car with a 904, 833, or 230 I can use.

49.25” for a 108” WB car with a 340/833/8.75”

 

[go-fish]

49.25” for a 108” WB car with a 340/833/8.75”

Dang, I knew I should have looked at more charts. The one I found here has the wrong length. Thanks.

This is what I used ok, wow driveshaft length chart problem


49.25

 

[go-fish]

Driveshaft Lengths 67-69 A body Baracuda

This one shows 48.96” as well for a 833/8.75 Duster.

 

[66fs]

The one you have will probably work. Not much difference between an 8 3/4 and an 8 1/4.