driveshaft

[69DARTS]

is the drive shaft fro m a 4spd and 8 3/4
the same as a 727 8 3/4
if not whats the differance
lengh or what
abody duster

 

[pettybludart]

I believe different tailstock lengths between 4 speed and the 727.

 

[340plot]

good spot to post that question moto. lol. so now i know if they are the same

 

[Demon 408]

From the Mopar Chassis Book (printed in 1990).

All dimensions are from mounting face of bell housing (where it mounts to engine block) to centerline of yoke (center of u-joint cap):

Manual Trans
1. A833 (A & F Bodies) = 34.08"
2. A833 (B & E Bodies) = 38.13"

Auto Trans
1. A727 (for all cars) = 38.13"
2. A904 (for all cars) = 34.12"

With everything else the same (same rear, same yoke size, same car), it means that swapping between a A body 4-speed and a 904 will use same length driveshaft.

 

[crackedback]

Eddie,

the 727 driveshaft is 44.99" for a Duster w 8.75 rear

The 833 driveshaft is 48.99"