[SOLD] Early 360 4 speed

[Sedanman]

I have a used 73 360 4 speed long block with pullies,alt brackets,dist and all acc's bolts. This came in a parts truck that I scrapped. This is an early 73 casting and the crank is already set up for a 4 speed. I opened it up and the heads and valley are clean inside. I will be taking the heads off to inspect the cylinders better and will update any findings. If you have any questions feel free to ask. If you are local and want to come look it over I am available when ever. $350

THIS IS BEING SOLD AS A BUILDER/CORE AND WHAT YOU SEE IS WHAT YOU GET. I DO PREFER PICK UP BUT CAN DELIVER UP TO 50 MILES FOR A FEE TO COVER MY TIME AND GAS.

 

[mycuda]

Let me know what cylinders look like
Might be interested.

Dave

 

[cuda620]

I have a used 73 360 4 speed long block with pullies,alt brackets,dist and all acc's bolts. This came in a parts truck that I scrapped. This is an early 73 casting and the crank is already set up for a 4 speed. I opened it up and the heads and valley are clean inside. I will be taking the heads off to inspect the cylinders better and will update any findings. If you have any questions feel free to ask. If you are local and want to come look it over I am available when ever. $350

THIS IS BEING SOLD AS A BUILDER/CORE AND WHAT YOU SEE IS WHAT YOU GET. I DO PREFER PICK UP BUT CAN DELIVER UP TO 50 MILES FOR A FEE TO COVER MY TIME AND GAS.

View attachment 1714969124

View attachment 1714969125

View attachment 1714969126

View attachment 1714969127

View attachment 1714969128

View attachment 1714969129

View attachment 1714969130

View attachment 1714969131

Interested,in Indianapolis.

 

[cuda620]

Interested,In Muncie Ind area. Pull heads and let me know. Only if not locked up and rebuild able. Thanks.

 

[T-N-T]

Is the 8 3/4" rear out of the same truck???

 

[rumblefish360]

Would you spectate and sell me the valve covers?
PM me

 

[Sedanman]

Is the 8 3/4" rear out of the same truck???

Yes. It's not locked up and is really clean inside

 

[Sedanman]

I prefer not to strip the engine out and selling it as seen

 

[Sedanman]

I also have the 11" flywheel at an additional $75

 

[Sedanman]

The cylinders are real nice with maybe a 0.10 ridge at the top. It also has 1.88 J heads on it. It looks as though someone had oiled the cylinders before they let it sit. The valves aren't sunk but some of the exhaust valves are rusty and will need replacing.

 

[Sedanman]

It is standard bore. This is a nice and complete builder

 

[Sedanman]

cuda620,your next in line if mycuda doesn't take it.

 

[Sedanman]

mycuda passed on it so cuda620 is next

 

[cuda620]

Where in Chicago?

 

[Sedanman]

60172 but can meet in Hammond. I also PM'd you my #

 

[Sedanman]

bump

 

[bdusted440]

bumpity

do you have the trans and bellhousing ?

 

[Sedanman]

For a truck,not a car and it was a 3spd

 

[bdusted440]

For a truck,not a car and it was a 3spd

do you know if the bell will work in a a-body? I have a 72 340 4 spd duster im starting on and its missing its drive train.

 

[Sedanman]

I can't answer that really since it came from a truck. It may be truck/van only.

 

[Sedanman]

Vroom vroom

 

[Sedanman]

bump

 

[Sedanman]

I would swap for a 91 and older roller cam 360,LA block only

 

[Sedanman]

Giggity

 

[Sedanman]

$300 and I keep the pullies,alt brackets and valve covers