Shooting myself for selling the ones I had 
but know I will need a good set, tell me what you have
Thank you , memike
but know I will need a good set, tell me what you have Thank you , memike
early V8 exhaust manifolds
- Thread starter memike
- Start date
-
prorac1
Well-Known Member
Might be a good compromise between restrictive early A manifolds and headers.
Ever considered magnum manifold swap?
Just a suggestion.
Eric
Ever considered magnum manifold swap?
Just a suggestion.
Eric
Dart Liebrandt
Member
I have the exhaust manifolds that came off my 1967 Dart with 273 cu in V8 (2 barrel carburetored model). They have been cleaned and coated. I ended up putting in my car a 318 with headers.Shooting myself for selling the ones I had
Thank you , memike
PM sent sir .
I am up for any subjection Eric, privet message sent
JDMopar
Well-Known Member
Mike.....67 and up drivers side manifold won't work on your car.
xLURKxDOGx
"An angel fat, at satan's feast"
I’ve got a set for 75$ plus shipping. PM me if interested.
Jake
Jake
What happened to the fenderwell headers, Mike?
prorac1
Well-Known Member
FISHYPETE
Well-Known Member
An old set of 360 exhaust man. would work on a Barracuda. Less restriction than273. Or would a Vaiiant be different ?
JDMopar
Well-Known Member
Valiant would be the same as a Barracuda, but I've never seen anything other than 340 HP manifolds or Magnum manifolds that will work on an early A....other than 64-66 manifolds. You are right, that the drivers side is restrictive because it has that dog leg in it on a 64-66 drivers side.
stickpony
Active Member
Hooker makes a great set of Longtube mandrel bent equal length headers for the 64-66 Barracuda 273 motors:
Hooker Headers 5208HKR Super Comp. Header 64-66 BARRACUDA DART VALIANT 700414009810 | eBay
valiantwagonguy
Well-Known Member
I have some 64 - 66 273 exhaust manifolds.
I am working on getting them in, I am thinking I will use the Hookers, I need to delete this post, I thought I did brother
I have yet to see a set of any manifolds that will work, just the 273 man's will. Same as Barracuda, if you can show me or point me in a direction that would be cool Pete .
Hold tight, I am seeing if I can tackle these myself, if I can't I will be getting back to you
Thank you
valiantwagonguy
Well-Known Member
I have 3 sets I think so don't worry ,they aren't going anywhere.
FISHYPETE
Well-Known Member
I should make myself more clear. 360 exhaust man. Will fit on a 273 in my manual steering non power steering 4sp. Had that setup back in the day before I restored it to original. Hi Mike
I have yet to see a set of any manifolds that will work, just the 273 man's will. Same as Barracuda, if you can show me or point me in a direction that would be cool Pete .
Hold tight, I am seeing if I can tackle these myself, if I can't I will be getting back to you
I am running a 360 , 904, manual steering, I would love to see an old picture or the 360 manifolds that will work if you could point me in that direction Pete, I understand if you can't find anything
Hey Mike, I searched for "273 with 340 manifolds". There are quite a few threads about this. Here's one that may help. Treblig's name came up as knowing what's going on with manifolds. He may be able to help.
273 with 340 exhaust manifolds
273 with 340 exhaust manifolds
, none power brakes here as well, if you do run across a picture can you put it in this thread please please Pete
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 25,866
- Reaction score
- 13,175
Mike, I noticed you're not asking about 340 manifolds from Second gens; Do they not fit your early-A?
edit
casting no's
28635553(L),2863549(R)
edit
casting no's
28635553(L),2863549(R)
Last edited:
72-74?
I have been doing some reading and from what I have seen the second generation 340 will fit but it's much harder to get them to fit, still learning this myself
-
